Define heap in linker and place other sections correctly

Makefile

@@ -1,19 +1,22 @@
-CC = arm-none-eabi-gcc
+TOOLCHAIN = arm-none-eabi
-AS = arm-none-eabi-as
+
-LD = arm-none-eabi-ld
+CC = $(TOOLCHAIN)-gcc
+AS = $(TOOLCHAIN)-as
+LD = $(TOOLCHAIN)-ld
 CPU = -mcpu=cortex-m4
 THUMB = -mthumb
 
 LDFLAGS = -T linker.ld
-CFLAGS = $(CPU) $(THUMB)
+CFLAGS = $(CPU) $(THUMB) -I libc/ -I ./
+CC_SYMBOLS = -DTOOLCHAIN_GCC_ARM
 
 QEMU = qemu-system-arm
-BOARD = netduino2
+BOARD = netduinoplus2
 
 # Output file
 TARGET = main.elf
 # Source files
-SRCS = os/main.c os/process.c os/scheduler.c os/alloc.c tasks/library.c tasks/tasks.c
+SRCS = os/main.c os/process.c os/scheduler.c os/alloc.c os/delay.c os/driver/usart.c os/sync/spinlock.c libc/library.c tasks/tasks.c
 # Object files
 OBJS = $(SRCS:.c=.o)
 

libc/library.c

@@ -1,10 +1,15 @@
 #include "library.h"
-
+#include "os/driver/usart.h"
-volatile unsigned int *const USART1_PTR = (unsigned int *)0x40011004;
+#include "os/delay.h"
 
 void puts(const char *s) {
-    while(*s != '\0') { /* Loop until end of string */
+    usart_tx_write_string(s);
-        *USART1_PTR= (unsigned int)(*s); /* Transmit char */
-        s++; /* Next char */
-    }
 }
+
+void usleep(unsigned int usec) {
+    delay_ms(usec);
+}
+
+void sleep(unsigned int sec) {
+    usleep(sec*1000);
+}

libc/library.h

@@ -1 +1,3 @@
 void puts(const char *s);
+void usleep(unsigned int usec);
+void sleep(unsigned int sec);

linker.ld

@@ -1,15 +1,40 @@
 ENTRY(_start)
 
+MEMORY
+{
+    FLASH  (rx)  : ORIGIN = 0x00000000, LENGTH = 1M
+    RAM  (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
+}
+
+_Min_Heap_Size = 0x200 ;
+_Min_Stack_Size = 0x200 ;       /* Required amount of stack.  Used by main(), then re-used as the interrupt stack after the kernel starts. */
+_estack = ORIGIN(RAM) + LENGTH(RAM);
+
+
 SECTIONS
 {
-    /* text section (code)*/
+	.text : { *(.text*) } 		> FLASH
-    .text : { *(.text*) }
+	.rodata  : { *(.rodata*) }	> FLASH
-    /* data section, initialized variables */
+	.bss  : { *(.bss*) }		> RAM
-    .data : { *(.data) }
+	.data  : { *(.data*) }		> RAM
-    ram_start = 0x20000000;
+	.heap : {
-    /* bss section, uninitialized variables */
+		. = ALIGN(8);
-    .bss : { *(.bss*) }
+        PROVIDE ( end = . );
-    /* stack section */
+        PROVIDE ( _end = . );
-    /* The stack is placed at the end of the RAM */
+        _heap_bottom = .;
-    stack_top = 0x2001ffff;
+        . = . + _Min_Heap_Size;
+        _heap_top = .;
+        . = . + _Min_Stack_Size;
+		. = ALIGN(8);
+	} >RAM
+
+	.stack (NOLOAD) :  {
+		. = ORIGIN(RAM) + LENGTH(RAM);
+		stack_top = .;
+	} > RAM
+
+	__StackLimit = stack_top - _Min_Stack_Size;
+
+	/* Check if data + heap + stack exceeds RAM limit */
+	ASSERT(__StackLimit >= _heap_top, "region RAM overflowed with stack")
 }

os/Makefile

@@ -1,22 +0,0 @@
-CC = arm-none-eabi-gcc
-AS = arm-none-eabi-as
-LD = arm-none-eabi-ld
-CPU = -mcpu=cortex-m4
-THUMB = -mthumb
-
-LDFLAGS = -T linker.ld
-CFLAGS = -c $(CPU) $(THUMB) -g
-
-all: main.o process.o scheduler.o
-
-main.o: main.c
-	$(CC) $(CFLAGS) main.c -o main.o
-
-scheduler.o: scheduler.c
-	$(CC) $(CFLAGS) scheduler.c -o scheduler.o
-
-process.o: process.c
-	$(CC) $(CFLAGS) process.c -o process.o
-
-clean:
-	rm -f *.elf *.o *.i

os/alloc.c

@@ -1,14 +1,16 @@
 #include "alloc.h"
 #include "stdint.h"
 
-void* *first_mem_avail = (void*) 0x20000000;
+HeapArena heap_arena;
+
+extern void * _heap_top;
 
 void init_allocator() {
-    *first_mem_avail = (void*) 0x20000000 +sizeof(void*);
+    heap_arena.wilderness = &_heap_top;
 }
 
 void* malloc(size_t size) {
-    void* block = *first_mem_avail;
+    void* block = heap_arena.wilderness;
-    *first_mem_avail += size;
+    heap_arena.wilderness += size;
     return block;
 }

os/alloc.h

@@ -1,4 +1,9 @@
 #include <stddef.h>
+#include <stdint.h>
+
+typedef struct {
+    void * wilderness;
+} HeapArena;
 
 void init_allocator();
 void* malloc (size_t size);

os/delay.c

@@ -0,0 +1,17 @@
+#define CLOCK_FREQUENCY 168000ULL
+
+unsigned int ms_to_ticks(unsigned int ms) {
+    return ms * (CLOCK_FREQUENCY/3);
+}
+
+void delay_routine(unsigned int delay_counter) {
+    asm("mov r1, %[input]\n"
+    "delay_loop:\n"
+    "subs r1, #1\n"
+    "bne delay_loop\n"
+    : [input] "=r" (delay_counter));
+}
+
+void delay_ms(unsigned int seconds) {
+    delay_routine(ms_to_ticks(seconds));
+}

os/delay.h

@@ -0,0 +1,2 @@
+void delay_routine(unsigned int delay_counter);
+void delay_ms(unsigned int ms);

os/driver/usart.c

@@ -0,0 +1,57 @@
+#include "usart.h"
+#include "os/delay.h"
+#include <stddef.h>
+#include <stdint.h>
+#define USART_SR_TXE (1 << 7)
+
+typedef struct uart_s {
+    uint32_t USART_SR;
+    uint32_t USART_DR;
+    uint32_t USART_BRR;
+    uint32_t USART_CR1;
+    uint32_t USART_CR2;
+    uint32_t USART_CR3;
+    uint32_t USART_GTPR;
+} uart_c;
+
+volatile uart_c *const USART1 = (uart_c *)0x40011000;
+
+static uint32_t usart_tx_ready(void) {
+    return (USART1->USART_SR & USART_SR_TXE) >> 7;
+}
+
+uint32_t usart_tx_write(const uint8_t *data_bytes, uint32_t n_bytes) {
+    if (data_bytes == NULL) return USART_TX_ERROR;
+
+    for (int i = 0; i < n_bytes; i++) {
+        unsigned int timeout = TIMEOUT;
+        while (!usart_tx_ready()) {
+            delay_ms(1);
+            timeout--;
+            if (timeout == 0) return USART_TX_BUSY;
+        }
+
+        USART1->USART_DR = *data_bytes;
+
+        data_bytes++;
+    }
+    return USART_TX_COMPLETE;
+}
+
+uint32_t usart_tx_write_string(const uint8_t *data_bytes) {
+    if (data_bytes == NULL) return USART_TX_ERROR;
+
+    while (*data_bytes != '\0') {
+        unsigned int timeout = TIMEOUT;
+        while (!usart_tx_ready()) {
+            delay_ms(1);
+            timeout--;
+            if (timeout == 0) return USART_TX_BUSY;
+        }
+
+        USART1->USART_DR = *data_bytes;
+
+        data_bytes++;
+    }
+    return USART_TX_COMPLETE;
+}

os/driver/usart.h

@@ -0,0 +1,12 @@
+#include <stdint.h>
+#define TIMEOUT 1000
+
+enum UartErrorCode {
+    USART_TX_ERROR,
+    USART_TX_BUSY,
+    USART_TX_COMPLETE
+};
+
+static uint32_t usart_tx_ready(void);
+uint32_t usart_tx_write(const uint8_t *data_bytes, uint32_t n_bytes);
+uint32_t usart_tx_write_string(const uint8_t *data_bytes);

os/process.c

@@ -1,15 +1,23 @@
 #include "process.h"
 #include "alloc.h"
+#include <stdint.h>
 
 void create_process_table(ProcessTable **table) {
     *table = malloc(sizeof(ProcessTable));
     (*table)->entries = 0;
 }
 
+ProcessStack* create_stack(size_t size) {
+    ProcessStack* stack = malloc(sizeof(ProcessStack) + size*sizeof(uint32_t));
+    stack->stack_size = size;
+    return stack;
+}
+
 int create_process(ProcessTable *table, void *entrypoint) {
     if (table->entries>=MAX_PROCESS) return 1;
 
     Process *pentry = &table->process_list[table->entries++];
     pentry->entrypoint = entrypoint;
+    pentry->stack = create_stack(STACK_SIZE);
     return 0;
 }

os/process.h

@@ -1,3 +1,4 @@
+#include <stddef.h>
 #ifndef PROCESS_H
 #include <stdint.h>
 
@@ -7,9 +8,14 @@
 #define STACK_SIZE 32
 #define STACK_START(stack)  (&stack[STACK_SIZE-1])
 
+typedef struct {
+    uint32_t stack_size;
+    uint32_t stack[];
+} ProcessStack;
+
 typedef struct {
     int (*entrypoint)();
-    uint32_t stack[STACK_SIZE];
+    ProcessStack* stack;
 } Process;
 
 typedef struct {
@@ -19,5 +25,7 @@ typedef struct {
 
 void create_process_table(ProcessTable **table);
 
+ProcessStack* create_stack(size_t size);
+
 int create_process(ProcessTable *table, void *entrypoint);
 #endif

os/sync/spinlock.c

@@ -0,0 +1,34 @@
+// sync_primitives.c
+#include "spinlock.h"
+
+// Initialize the spinlock
+void spinlock_init(Spinlock *spinlock) {
+    spinlock->lock = 0; // Unlocked state
+}
+
+// Acquire the spinlock
+void spinlock_acquire(Spinlock *spinlock) {
+    int status;
+    do {
+        // Wait until the lock is available
+        do {
+            __asm__ volatile ("ldrex %0, [%1]"
+                              : "=&r" (status)
+                              : "r" (&spinlock->lock)
+                              : "memory");
+        } while (status != 0);
+
+        // Try to acquire the lock using strex
+        __asm__ volatile ("strex %0, %2, [%1]"
+                          : "=&r" (status)
+                          : "r" (&spinlock->lock), "r" (1)
+                          : "memory");
+    } while (status != 0); // Retry if strex failed
+}
+
+// Release the spinlock
+void spinlock_release(Spinlock *spinlock) {
+    // Use a memory barrier to ensure proper ordering
+    __asm__ volatile ("dmb" ::: "memory");
+    spinlock->lock = 0; // Release the lock
+}

os/sync/spinlock.h

@@ -0,0 +1,16 @@
+#ifndef SPINLOCK_H
+#define SPINLOCK_H
+
+#include <stdint.h>
+
+// Spinlock
+typedef struct {
+    volatile int lock;
+} Spinlock;
+
+void spinlock_init(Spinlock *spinlock);
+void spinlock_acquire(Spinlock *spinlock);
+void spinlock_release(Spinlock *spinlock);
+
+
+#endif

tasks/tasks.c

@@ -1,11 +1,13 @@
 #include "library.h"
 
 int task2(void) {
-    puts("Hello World from task 1\n");
+    puts("Hello World from task 2\n");
+    sleep(4);
     return 0;
 }
 
 int task1(void) {
-    puts("Hello World from task 2\n");
+    puts("Hello World from task 1\n");
+    sleep(2);
     return 0;
 }